# Bings maps not displaying with v10

**URL:** <https://community.thinkgeo.com/t/bings-maps-not-displaying-with-v10/9891>\
**Category:** iOS\
**Created:** [August 20, 2020, 10:30pm UTC](https://community.thinkgeo.com/t/bings-maps-not-displaying-with-v10/9891 "2020-08-20T22:30:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Richard6](https://community.thinkgeo.com/letter_avatar_proxy/v4/letter/r/f9ae1b/32.png) [@Richard6](https://community.thinkgeo.com/u/Richard6)\
**Post date:** [August 20, 2020, 10:30pm UTC](https://community.thinkgeo.com/t/bings-maps-not-displaying-with-v10/9891/1 "2020-08-20T22:30:13Z")

</div>

[https://community.thinkgeo.com/t/requestdrawing-not-redrawing-layer/9886](https://community.thinkgeo.com/t/requestdrawing-not-redrawing-layer/9886)

Due to 2nd problem in the above issue I switched back to v10 in order to get our product to our beta users for iOS. However I ran into an issue with BingMaps where I get the camera icon for all map tiles. This is exhibited in the same test case referenced above where I simply made change to use v10. Attached is the modified project and once again appid needs to be set to a valid appid.

I figure there must be an additional requirement in v10 for bingmaps that is handled automatically in v12 – unfortunately I have no idea what that might be. This is for iOS only.

[ThinkgeoTestCase.zip](https://community.thinkgeo.com/uploads/short-url/slzHUX0i069y23NmOJBFxNx3sOL.zip) (2.2 MB)

---

<div class="post-metadata">

**Author:** ![Frank4](https://community.thinkgeo.com/user_avatar/community.thinkgeo.com/frank4/32/25224_2.png) [@Frank4](https://community.thinkgeo.com/u/Frank4)\
**Post date:** [August 25, 2020, 4:35pm UTC](https://community.thinkgeo.com/t/bings-maps-not-displaying-with-v10/9891/2 "2020-08-25T16:35:42Z")

</div>

Thanks Richard,  
Yes. I can reproduce the issue. I also tested with the v10 released sample [https://gitlab.com/thinkgeo/public/thinkgeo-mobile-maps/-/tree/support/v10/samples/iOS/GettingStarted](https://gitlab.com/thinkgeo/public/thinkgeo-mobile-maps/-/tree/support/v10/samples/iOS/GettingStarted)  
this one works fine after I changed the layer to bingmap layer. It use a different way to initialize the map. Anyway we will released the V12 xamarin form edition next week. So I recommend use the V12 xamarin form next week as Ben mentioned in the  
[RequestDrawing not redrawing layer](https://community.thinkgeo.com/t/requestdrawing-not-redrawing-layer/9886)

Thanks

Frank