# Partial tiles using ZedGraph

**URL:** <https://community.thinkgeo.com/t/partial-tiles-using-zedgraph/3654>\
**Category:** WPF\
**Created:** [May 12, 2014, 7:37am UTC](https://community.thinkgeo.com/t/partial-tiles-using-zedgraph/3654 "2014-05-12T07:37:36Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Meyer](https://community.thinkgeo.com/letter_avatar_proxy/v4/letter/m/ccd318/32.png) [@Meyer](https://community.thinkgeo.com/u/Meyer)\
**Post date:** [May 12, 2014, 7:37am UTC](https://community.thinkgeo.com/t/partial-tiles-using-zedgraph/3654/1 "2014-05-12T07:37:36Z")

</div>

Good&nbsp;day  
  
  
  
I&nbsp;have&nbsp;recently&nbsp;started&nbsp;implementing&nbsp;ZedGrap&nbsp;into&nbsp;our&nbsp;solution,&nbsp;however&nbsp;we&nbsp;are&nbsp;getting&nbsp;partial&nbsp;tiles&nbsp;as&nbsp;per&nbsp;below.&nbsp;What&nbsp;could&nbsp;the&nbsp;cause&nbsp;of&nbsp;this&nbsp;me?&nbsp;And&nbsp;is&nbsp;there&nbsp;a&nbsp;possible&nbsp;solution?  
  
  
  
The&nbsp;ZedGraph&nbsp;LayerOverlay&nbsp;is&nbsp;the&nbsp;only&nbsp;data&nbsp;currently&nbsp;loaded&nbsp;into&nbsp;a&nbsp;Overlay&nbsp;seperate&nbsp;form&nbsp;the&nbsp;basemap&nbsp;data…  
  
  
  
 ![](https://community.thinkgeo.com/uploads/default/original/1X/65b63fab42eb29fcb5b1b196404702008217a8a0.PNG)  
  
  
  
Regards  
  
Meyer

---

<div class="post-metadata">

**Author:** ![Troy](https://community.thinkgeo.com/letter_avatar_proxy/v4/letter/t/85f322/32.png) [@Troy](https://community.thinkgeo.com/u/Troy)\
**Post date:** [May 13, 2014, 12:25am UTC](https://community.thinkgeo.com/t/partial-tiles-using-zedgraph/3654/2 "2014-05-13T00:25:46Z")

</div>

Hi&nbsp;Meyer,&nbsp;  
  
  
  
I&nbsp;guess&nbsp;this&nbsp;might&nbsp;be&nbsp;caused&nbsp;as&nbsp;the&nbsp;layeroverlay&nbsp;is&nbsp;under&nbsp;MultipleTile,&nbsp;switching&nbsp;to&nbsp;SingleTile&nbsp;should&nbsp;fix&nbsp;this&nbsp;issue.&nbsp;  
  
  
  
please&nbsp;feel&nbsp;free&nbsp;to&nbsp;let&nbsp;us&nbsp;know,&nbsp;if&nbsp;the&nbsp;issue&nbsp;persists,&nbsp;  
  
Thanks,&nbsp;  
  
Troy

---

<div class="post-metadata">

**Author:** ![Meyer](https://community.thinkgeo.com/letter_avatar_proxy/v4/letter/m/ccd318/32.png) [@Meyer](https://community.thinkgeo.com/u/Meyer)\
**Post date:** [May 13, 2014, 3:13am UTC](https://community.thinkgeo.com/t/partial-tiles-using-zedgraph/3654/3 "2014-05-13T03:13:49Z")

</div>

Hi&nbsp;Troy&nbsp;  
&nbsp;&nbsp;  
&nbsp;Using&nbsp;SingleTile&nbsp;resolved&nbsp;the&nbsp;issue.&nbsp;Thank&nbsp;you&nbsp;very&nbsp;much.&nbsp;  
&nbsp;&nbsp;  
&nbsp;Regards&nbsp;  
&nbsp;Meyer

---

<div class="post-metadata">

**Author:** ![Troy](https://community.thinkgeo.com/letter_avatar_proxy/v4/letter/t/85f322/32.png) [@Troy](https://community.thinkgeo.com/u/Troy)\
**Post date:** [May 13, 2014, 8:30pm UTC](https://community.thinkgeo.com/t/partial-tiles-using-zedgraph/3654/4 "2014-05-13T20:30:07Z")

</div>

Meyer,&nbsp;  
&nbsp;&nbsp;  
&nbsp;Good&nbsp;to&nbsp;hear&nbsp;it&nbsp;works.&nbsp;  
&nbsp;&nbsp;  
&nbsp;Troy